http://www.streetfightermotorcycle.com Streetfighter News, Messages and Articles from CustomFighters.com Streetfighter Forum Fri, 28 Nov 2008 05:16:46 +0000 http://backend.userland.com/rss092 en http://www.streetfightermotorcycle.com/streetfighters/317/cbx/ I have a new problem with my swinger swap. The z1000 shock is too long to fit with the vfr swingarm / triangle. Also, the hole where the shock passes through is too far forward. I might be able to use a really short shock... but ... http://www.streetfightermotorcycle.com/streetfighters/316/unique-shock-problem/ Hey guys, as much as i HATE and dont want to do this, i need to sell my bike... 2002 kawi zx9r has approx 18k miles, dont have the stock speedo anymore but i know its definitely not over that. last year i had the bike re-jetted with a factory pro jet kit ... http://www.streetfightermotorcycle.com/streetfighters/304/02-zx9r/ Hello all i've been lurking here for a bit, getting ideas and learning about fighters I've been riding for about 6 years now, mostly on my dad's classic BMW air heads (a '71 /5), but just bought a bike for myself. A '92 FZR 600 for tooling around campus and the ... http://www.streetfightermotorcycle.com/streetfighters/290/new-from-co/ Hey all :) Just thought I'd post some piccies up of my bike. Still in the building process, got lots left to do. Here's a coupla older ones... And this one was taken at the w/e at a local bike show. Had to put the standard sets back on ... http://www.streetfightermotorcycle.com/streetfighters/268/supercharged-z1000/ This was a really nasty looking sport tourer that I ripped apart. Built the tailsection from a BMW seatpan, made the fairing shield, made the subframe, molded chunks of the old lower fairing onto the gas tank, dropped the front end, major major major amounts of carb modding and jetting ... http://www.streetfightermotorcycle.com/streetfighters/267/98-triumph-sprint-executive/ What do you guys think of my bike with a euro tail on it? http://www.streetfightermotorcycle.com/streetfighters/262/zro-1s-euro-r6/ A bunch of Hooligans haha. I love it http://www.streetfightermotorcycle.com/streetfighters/248/fighters-are/ OK, so here's the deal...I am planning on potentially building a new subframe for my SV...for an upcoming tail swap. BUT, the snag is that although I'd like to build it out of aluminum...I have no one local that can weld it. If I make it outta steel, i have ... http://www.streetfightermotorcycle.com/streetfighters/246/subframe-fabbingsteel-versus-aluminum/ So the temporary "tip" (I'll call it) blew off while I was going to a job yesterday. I'm not sure exactly when it happened as I didn't notice until I got to a stop light. Anyhow, I made a new, hopefully permanent, muffler. Again, I went to the auto parts ... http://www.streetfightermotorcycle.com/streetfighters/244/more-exhaust-changes/